Ethan Gibbs/ February 21, 2016/ Improvements & Maintenance

The importance of a bathroom does not need to be mentioned as it is known to all. And we simply cannot afford to not pay attention to it. It is one of the most highly functional sections of the house at the same time it should even be aesthetically appealing too.

Shower sealing in Adelaide plays a very essential part in every bathroom. Everyone wants to take a good shower everyday as it completely refreshes us from inside. It completely energizes one from within and this is why it is essential for one to have a washroom that is in proper working condition.

Shower sealing must be give immense importance and should not be taken lightly. If you too have a shower tray then here are a few essential tips which might come handy for you. One of the most common factors leading to water leaks in your bathroom is due to breakdown or poor application of silicone sealant. This is why you might notice water leaking from enclosures and shower trays. However if you wish to work out yourself, then here are a few essential tips you can work out at home and attain professional touch.

Firstly remember that you should get proper kind of tools for the job to be done correctly. Thus, before you apply the silicone sealant, you need to be prepared about it.

Always very vigilantly go through the directions provided by the silicone sealant manufacturer. This is critical because the sealant should be completely cured before it gets in touch with water again.

The section where silicone sealant would be applied on to should be dirt free and dry. You can even use vacuum to get rid of dusts and dirt. Then clean the tiles and the surface of shower tray where the sealant will be applied with wet cloth. Make sure that the cloth is well soaked in warm water and it must also have mild detergent s that unwanted and intractable deposits can be easily removed. Make sure that the area is completely kept dry else it will be tough for the silicone sealant to stick to the surface properly.

Make sure that you are ready with the application device. These tools turn out being very handy as they are made from rubber and are particularly made in a way which will assist in removing extra sealant. It leaves behind a very orderly and regular bead of silicone.

Very cautiously apply the silicone sealant and the follow the instructions of the manufacturer.

In case you use Fugi to even out and flatten the silicone sealant, select the size which will be provide you with the best result and bless you with a finished bead. You need to make sure that the gaps have been properly covered between the tiles and the shower tray.

Share this Post